Methanol
High-pressure Methanol Synthesis Catalyst
SCST-251 High-pressure methanol synthesis catalyst is a Cu-Zn-Al catalyst. It is suitable for methanol synthesis plant with natural gas, coke oven gas, refinery gas, naphtha, coal, and oil field gas as its feedstock. The applicable pressure of the methanol synthesis plant is 15~32Mpa.
Physical and Chemical Properties
|
Item |
SCST-251 |
|
Appearance |
Luster dark cylinder |
|
Size, mm |
Ф5×4~6, Ф9×6~8 |
|
Strength, N/cm |
≥ 250, ≥ 340 |
Operation Conditions
|
Temperature, ℃ |
200~300 |
|
Pressure, MPa |
15.0~32.0 |
|
Space Velocity of Feed Gas, h-1 |
5000~20000 |
|
Space-time Yield of Methanol, g/(mL•h) |
Initial activity ≥ 1.2, activity after heat resistance ≥ 1.0 |
Technical Features
High conversion rate; with carbon oxides at the outlet below 100 ppm at SOR and below 800 ppm at EOR in the methanolization-methanation process;
Resistant to high pressure and high space velocity, up to more than 20,000h-1; high conversion rate;
High strength, especially after reduction; low possibility of pulverization during operation;
Easily and stably reducible in HP methanol equipment; temperature rise and reduction as planned, without temperature runaway.
Natural gas to hydrogen technology
After pre-treatment, natural gas or other light hydrocarbon raw materials are mixed with steam and enter a special conversion furnace. Under the action of nickel catalyst SCST-20X, steam reforming reaction occurs to generate conversion gas containing H2, CO2, CO and other components. After recovering heat from the conversion gas, the conversion gas containing CO2 and H2 is obtained through water vapor shift reaction, and then purified by PSA to obtain high-purity H2. The PSA tail gas is returned to the conversion furnace for combustion and heat recovery.
Conventional Methanol-to-Hydrogen Technology
1. Methanol-to-hydrogen technology has certain advantages among various hydrogen production technologies due to its wide availability of raw materials, technological maturity, ease of operation, economic efficiency, and environmental friendliness.
2. Process Flow: Methanol and steam, under specific pressure and temperature conditions, pass through a methanol-steam reforming catalyst bed to generate reformed gas, whose main products are carbon dioxide and hydrogen. This reformed gas is then subjected to pressure swing adsorption to obtain product hydrogen with a purity of 99.0%~99.999%.
Hot Products
Fe-Mn Bifunctional Desulfurizer
Pre-reforming Catalyst
High Temperature CO Shift Catalyst
Methanation Catalyst
Methanol Steam Reforming Catalyst
High Temperature Methanol Steam Reforming Catalyst
Low-pressure Methanol Synthesis Catalyst
Contact
